1-800-507-7084
New, Refurbished and Used Cisco Networking Equipment

John McCarthy (sales/technical support)
john@whirled-routers.com
whirledervish


Skype Me™!
Get Skype
and call me for free.

____________________

Mariela Pereyra
(sales/technical support)

mariela@whirled-routers.com
marielawhirled


____________________

Sandy McCarthy
(Office/Web)

sandy@whirled-routers.com
swestelaken


____________________

Whirled Routers, Inc.
811 N. Catalina Ave.,
Stuite 3112
Redondo Beach, CA
90277
USA


Phone: 310-376-8755
Fax: 310-376-8785

 



Home - SellTo Us - Services - About Us - Terms - Employment - Order
________________________________________________________________

 

Cisco WS-C2924-XL-EN Switch
Cisco WS-C2924-XL-EN

Cisco WS-C2924-XL-EN Catalyst Managed 24-port FastEthernet 10/100 Mbps Switch

The Catalyst 2900 series XL switches are workgroup Ethernet switches that supply autosensing 10BaseT or 100BaseT connections on all ports. These switches-also referred to as the Catalyst 2900 series-can be deployed as backbone switches aggregating 100BaseT traffic from other switches and hubs or in mixed configurations connecting hubs switches servers and desktops. 10/100 Ports Catalyst 2900 series 10/100 ports are internally switched to all other switch ports and use RJ-45 connectors and Category 5 cabling. They can operate at either 10 or 100 Mbps in full or half duplex. For autonegotiation with other devices the ports are IEEE 802.3u-compliant. When connected to another device a port senses the speed and duplex settings of the attached device and advertises its own capabilities. If the connected device also supports autonegotiation the Catalyst 2900 series port negotiates the best connection and configures itself accordingly. Ports can also be explicitly set to operate in any combination of half duplex full duplex 10 Mbps or 100 Mbps. In all cases the attached device must be within 100 meters of the switch..

The Catalyst 2924M XL switch, a member of the Catalyst 2900 Series XL family, contains 24 10Base-T/100Base-TX ports and two versatile module slots to provide unmatched expansion capabilities and high-speed connectivity. The modular design allows users to easily add 10Base-T/100Base-T, 100Base-FX, Gigabit Ethernet, or Asynchronous Transfer Mode (ATM) (OC-3) ports to increase port density and deliver high-speed uplinks. With the Gigabit Ethernet module, Catalyst 2924M XL switches can be stacked (up to nine switches) with the low-cost Cisco GigaStack gigabit interface controller (GBIC). The advanced Cisco architecture incorporates a switch fabric of 3.2 Gbps and a forwarding rate of 3.0 million packets per second (pps) to deliver wire-speed performance across all ports.

All of our new Cisco WS-C2924-XL-EN Switches, preowned Cisco WS-C2924-XL-EN Switches unused Cisco WS-C2924-XL-EN Switches, and refurbished Cisco WS-C2924-XL-EN Switches are guaranteed to be in perfect working and physical condition. We are also very interested in purchasing any of your new Cisco WS-C2924-XL-EN Switches and refurbished or preowned Cisco WS-C2924-XL-EN Switches.